Fixing Rings – Info

Secure and comprehensive locating ring program worldwide

     Locating Rings - Fixing Rings / Locating rings for pedestal bearing housings 

Festringe für Stehlager-Gehäuse  /   Festringe für Wälzlager-Gehäuse  / Bagues d'arrêt  /  Stelringen

P1180881_Festringe_ret

Currently listed locating ring dimensions: 625

• Manufacture of all diameters from 35 mm to about 2000 mm

• Permanent storage for about 650 common locating ring types

 

Highest quality • 100% Final inspection • Faultless

• Strong customer orientation • Delivering on time for 70 years 

 

In-house design of special-bending machines 

 

Express service 

 

High dimensional and planning accuracy for locating rings of any size 

 

APPLICATIONS FOR LOCATING RINGS AND SPACER RINGS 


Präzision939

100% Final Control

Precision 

Our rings are manufactured strictly according to product delivery specifications and process instructions under the DIN EN ISO 9001 certification.

 

We exclusively use steels of the highest and consistent quality. Our quality and conscientious processing yields a constant complaint rate:  < 0.05 %. The high dimensional and plan accuracy, combined with all-round edge radius, guarantee the smooth installation of our products. Detailed information can be found at: LOCATING RINGS IN STANDARD WIDTHS and

LOCATING RINGS - ALL STANDARD TYPES. 

 


Excerpt of QM Statistics 

Figures from our final inspection of the locating ring - widths:  Tolerance compliance + 0 /- 0,10 mm   =  100%

 
Period Tolerance Range +0 / -0  bis -0,01 mm +0 / -0,02 mm +0 / -0,03 mm +0/-0,04 bis -0,05 mm
01 - 06 / 2014 + 0 / - 0,10 mm 21 % 16 %  9,5 %   34,5 %
06 - 12 / 2014 + 0 / - 0,10 mm 22,5 %  19 %  11,5 %  36 % 
01 - 06 / 2015 + 0 / - 0,10 mm 22 % 21 %  12 %  35 % 
 

The table analysis shows a steady improvement in achieved tolerances. In nearly 90% of all manufactured rings, current values stand well below the maximum tolerance, as apparent from the table above. 

 

Product form

Material

Quality steel as per DIN (acc. Test certificate 3.1)

Strength 400 - 650 Mpa (i.d.R. 400 - 450 Mpa)
Processing interfaces deburred, ground / sides ground flat / edges bevelled or chamfered
Surface clean, bright, corrosion-resistant, free from cracks and grooves
Corrosion-protection Corrosion-protection oil / corresponding processing, storage and packaging

Product labelling

A few examples....

Designation External Ø x (/) Width 

BA                            200 x 13,5
FR                            400 x   8
FE                            360 x 12
FRM                        760 / 10                                                                          

Verpackung_844_hell

Single packing with barcodes and matrix

 

Packaging 

Packaging is done with polyethylene bags, individually or as a 10-pack. Plastic bags will also bear labels with all the required information. Example: Number, designation (diameter, width, thickness), order number, customer name, etc. print with barcode and / or matrix. As external packing, we use stable cardboard or steel boxes on Euro pallets. 

 

ECOLOGY / Environment > 


 LOCATING RINGS INSTRUCTION MANUAL  |  LOCATING RINGS – STANDARD WIDTHS >

BASICS > |  PRODUCTS >  |  LOCATING RINGS > |  SPACER RINGS > |  LUBRICATION RINGS > |  STEEL TRADE > |  QUALITY > |  SERVICE > |